Home / Accreditation / Glasteel® II Installer Accreditation Exam

Glasteel® II Installer Accreditation Exam

To become a Tank Solutions accredited tank installer, read the installation manual, then answer every question below. You need 90% to pass. Pass and your Certificate of Completion is issued straight away, valid for three years.

2. Your details

Your certificate shows your name, company and email exactly as you enter them here.

3. Accreditation exam

20 questions. Choose one answer for each.

  1. Failure to follow the installation instructions will void the tank warranty?
  2. Prior to checking the vacuum gauge, the tank exterior should be visually inspected for damage?
  3. Who is responsible for ensuring all test equipment is in good working order?
  4. For how long must the vacuum on the interstitial space be monitored to ensure the vacuum is holding?
  5. What is the minimum allowable space between the underside of the concrete pad and the top of the riser?
  6. After backfilling to grade, the level of vacuum should be checked again to ensure no damage has been done to the tank during installation?
  7. With unstable soil conditions (where soil will not maintain a vertical wall) what is the minimum allowable space between the side and endcap of the tank and the excavation wall to equal to:
  8. When anchoring a tank, the use of steel cable or round bar is strictly prohibited?
  9. Straps should be retightened after ballasting?
  10. The maximum time for potable water ballast to remain in the tank is?
  11. No circumstances warrant the use of chains around the tank shell?
  12. If the tank is to be stored on site prior to installation, care must be taken to ensure the storage location is free of rocks and debris which may damage the outer jacket of the tank?
  13. The interstitial space should be both pressure and vacuum tested?
  14. It is the responsibility of the installing contractor to provide means of preventing employee exposure to hazardous fumes associated with the excavation?
  15. It is the responsibility of the site owner to secure the walls of the excavation?
  16. Bottom anchoring is the only acceptable method of anchoring?
  17. Tank Solutions recommends GS11 tanks be installed using either pea gravel, crushed stone or compacted clean washed sand as backfill?
  18. Before using, backfill material should be washed and free flowing?
  19. It is acceptable to drag the tank into position?
  20. If slings are of sufficient strength, it is acceptable to lift the tank by wrapping slings around the tank instead of using lifting lugs?

If you pass, your name, company and certificate number are listed in our Installer Directory. See our Privacy Policy.